|
|
|
PRODUCT CATALOGUE |
We can supply sheet cut in strips, in different
widths, according to your requirements |
|
|
Name : SBR Rubber Sheet |
Features: |
Model No. :5031
| Temperature range -50° to + 110°C. Has excellent physical properties including abrasion resistance, good tensile strength, low compression set and high tear properties. Resistance also to some organic solvents and many organic salts and acids.
| |
Certification(s) :ISO9001 |
Colours |
To special order |
Other sizes |
To special order |
Cut lengths |
Yes |
Cut shapes |
Yes |
|
|
|
|
|
|
|
Name :
Red SBR Sheet |
Features: |
Model No. :5032
| A value priced rubber sheet that combines the properties of our Black SBR rubber with a stable red colour in outdoor applications. Used for gaskets and other sheet applications where a recognizable red colour is required.
| |
Certification(s) :ISO9001 |
Colours |
To special order |
Other sizes |
To special order |
Cut lengths |
Yes |
Cut shapes |
Yes |
|
|
|
|
|
|
|
|
Typical Values
Tensile: 4.0Mpa
Elongation: 280%
Hardness: 65±5 Shore A
Working Temperature: 110℃(230°F)
Heat resistance after 70 hours:130℃(266°F)
Low working Temperature: -28℃(-18.4°F)
Specific Gravity: 1.5
|
• Its general properties are similar to those of Natural Rubber, but it is more resistant to ageing and temperature, and like Natural Rubber, these properties can be improved further by careful compounding.
• Temperature range: -50º C to +110º C.
• Due to its unsaturated molecular structure SBR materials tend to have only moderate resistance to tearing, ozone and general weathering. They do not have the same resilience as Natural Rubber.
• Resistance to Chemicals; good resistance to many inorganic chemical products. Limited resistance to mineral oils, but is not recommended for use with oxidising acids and general organic liquids.
STANDARD
Basic Properties: |
Durometer Hardness |
Tens. Stren. |
Ultimate Elongation |
Tear |
Standard: |
ASTM D2240 |
ASTM D412 |
ASTM D412 |
ASTM D624 Die C |
|
COMMERCIAL GRADE SBR RUBBER SHEET
Elastomer |
Durometer Hardness |
Tens. Stren. |
Ultimate Elongation |
Specific Gravity |
Colour |
SBR |
Shore A+/-5 |
Mpa |
% Min |
g/cm3 |
|
SBR1 |
65° |
3 |
150 |
1.4 |
|
SBR2 |
70° |
2.5 |
130 |
1.5 |
|
SBR3 |
50° |
5 |
300 |
1.40 |
Red |
SBR4 |
65° |
5 |
220 |
1.60 |
White |
SBR5 |
65° |
5 |
220 |
1.60 |
Black |
SBR6 |
70° |
4 |
300 |
1.55 |
Black |
SBR7 |
70° |
4 |
200 |
1.46 |
Black |
SBR8 |
50° |
8.5 |
400 |
1.18 |
Black |
SBR9 |
65° |
4 |
200 |
1.49 |
Black |
SBR10 |
80° |
4 |
200 |
1.44 |
Black |
SBR11 |
90° |
4 |
150 |
1.44 |
Black |
FOOD GRADE SBR RUBBER SHEET
Elastomer |
Durometer Hardness |
Tens. Stren. |
Ultimate Elongation |
Specific Gravity |
Colour |
SBR |
Shore A+/-5 |
Mpa |
% Min |
g/cm3 |
|
SBR12 |
50° |
6 |
500 |
1.30 |
White |
SBR13 |
65° |
10 |
600 |
1.30 |
White |
SBR14 |
45° |
12 |
550 |
1.27 |
White |
|
|
|
|
|